Safety Awareness
Americans With Disabilities Act
The Americans with Disabilities Act requires that all commercial buildings become more accessible to the physically disabled. The law requires these establishments to remove architectural and communication barriers where “readily achievable”. Comply with the signage guidelines by using our complete line of A.D.A. signs and labels.
Compliance: OSHA 29 CFR 1911 and the Americans With Disabilities Act.
Add material/size suffix to catalog number when ordering. View chart containing material identification code and pricing
S-72
- 4“x4” AP
- 7“x7” R
- 7“x7” P
S-23
- 4“x4” AP
- 7“x7” P
- 7“x7” R
S-73
- 7“x7” R
- 7“x7” P
S-75
- 7“x7” P
- 7“x7” R
S-98
- 7“x7” R
- 7“x7” P
S-74
- 7“x7” P
- 7“x7” R
Symbols of Access Parking and Traffic Control Signs
According to the A.D.A. law, “Accessible parking spaces shall be designated as reserved by a sign showing the symbol of accessibility.” These non-reflective baked enamel 18“x 12” signs are offered in either .032 Aluminum (with four corner mounting holes) or .063 Aluminum (with two center mounting holes at top and bottom).
Additional Signs
Van Accessible signs are required to comply with A.D.A. Van Parking regulations section 4.1.2(5) (b). These and other signs are to be mounted below parking signs to provide additional information. 6“x 12”.
TMA-5
- 6“x12” G
- 6“x12” H
TMA-1
- 6“x12” G
- 6“x12” H
TMA-3
- 6“x12” G
- 6“x12” H
TM-104
- 18“x12” G
- 18“x12” H
TM-93
- 18“x12” G
- 18“x12” H
TM-84
- 18“x12” G
- 18“x12” H
TM-90
- 18“x12” G
- 18“x12” H
TM-83
- 18“x12” G
- 18“x12” H
TM-10
